Click to print this pageInternships in Public Science Education LogoMaterials Research Science and Engineering Center LogoInterdisciplinary Education Group Logo

Education and Outreach: Nanotechnology Activity Guides

| Return to this activity's summary page |

Nanoelectronics: Giant Magnetoresistance (GMR) and Computer Hard Drives

Audience: Middle school class
Time Needed: 45 minutes

Objectives:
Related Wisconsin Model Academic Science Standards:
Activity Materials:
Activity Instructions:

See the 'notes' section of the Powerpoint slides for instructions on how to combine the activities and the slides.

Introduction to Nano

Ask the students to get into groups of three to four. Explain that 'nano' means 10-9 or one billionth of something and that dividing by 1000 can help us understand how small nano is. Use a meter stick to show that a meter is divided into 1000 mm. Explain that if you divide 1 mm by 1000, you get 1 micrometer (something that we can't see), and if you divide the micrometer into another 1000 equal spaces, each one of those would be 1 nanometer.

Break down the word Giant Magnetoresistance

Ask each group to brainstorm definitions or explanations of one of the three following words: giant, magneto, resistance. After a couple minutes, ask a representative of each group to share his/her group's definition of the word.

Summarize by emphasizing that giant means the effect is very large, that the effect has something to do with magnetism, and that the resistance is related to how much electricity/current can flow through the material. GMR materials are found in read heads of computer hard drives and control the flow of current through a circuit that reads the magnetic data on the hard disk.

Electricity

Describe the three parts of an atom (electrons - negative charge, protons - positive charge, neutrons - neutral). Explain that moving electrons create an electric current. Explain that some materials are conductors and are good carriers of electric current, and that some materials are insulators and are not good carriers of electric current.

Ask the groups to answer the electricity question shown in the Powerpoint slide. In order to do so, each group will need to test various materials in a simple circuit for conductivity.

Magnetism

Explain how to identify magnetic and non-magnetic materials. Ask the groups to answer the magnetism question in the Powerpoint slide. In order to do so, each group will need to test various materials with a cow magnet for magnetism.

Electricity/Magnetism Relationship

Explain that current induces a magnetic field, and a that magnetic field induces an electric current. Ask the groups to answer the electricity/magnetism question in the Powerpoint slide. In order to do so, each group will need to experiment with the cow magnet and the coil/LED demo.

Giant Magnetoresistance and the Read/Write Head

Explain GMR materials and what happens when a magnetic current is introduced. Explain how information is stored on the platters. (Ask GMR group for explanation.) Ask the groups to answer the GMR question. Then students can try to find the read/write head by dissecting a hard drive with a screwdriver. Show the read/write head and explain basic function in computer hard drive (Ask GMR group for explanation.)

Discuss other applications for GMR Materials (bike shocks, GM runner boards on cars, traffic light sensors; see "Background" for further examples.).

Required Background Information:

In addition to the familiar properties of electrons (as negatively charged particles with a very small mass and the ability to carry current through a metal wire), electrons have the property of spin. When a charged electron spins, it creates a magnetic field in the opposite direction of the spin of the electron. Objects become magnetic when the electrons within them spin in the same direction, so as not to cancel out the magnetic fields.

Scientists found that when they alternated magnetic and non-magnetic layers, each a few atomic layers thick, the resistance in the materials changed dramatically when a magnetic field was introduced. When electrons in different magnetic layers spin in opposite directions, the resistance is high, as in Figure 1a; when the electrons spin in the same direction the resistance is low, as in Figure 1b. If a magnetic field were introduced to a material where the electrons were spinning in different directions, the spins would change to be all the same direction, thus causing a drop in resistance. These layered materials are called Giant Magnetoresistance (GMR) materials. The read heads of most modern hard drives are made of an engineered nanomaterial that exhibits GMR. GMR also is/can be used for motion detectors, automotive antilock breaks, current transformers, and many other things. What makes GMR materials new and different from materials that are used in these products already is the fact that they are smaller and more sensitive than their predecessors.

GMR materials are made from alternating layers of magnetic and non-magnetic metals that are nanometers inthickness.

Figure 1: GMR materials are made from alternating layers of magnetic and non-magnetic metals that are nanometers in thickness.

Supplemental Materials:

If you are unable to open pdf files, please download the latest version of Adobe Acrobat Reader.

References:

IPSE website: http://mrsec.wisc.edu/edetc/IPSE/

GMR websites:

Computer hard drive websites:

Electricity and magnetism websites:

Authors:
IPSE Interns: Manisha Ghorai, Melissa Kurth, Erin Schmidt

IPSE Leadership Team: Wendy C. Crone, Amy Payne, Greta Zenner, and Tom Derenne

| Return to this activity's summary page |

The Nanotechnology Activity Guides are a product of the Materials Research Science and Engineering Center and the Internships in Public Science Education Project of the University of Wisconsin - Madison. Funding provided by the National Science Foundation.